Dynamic Modeling and Analysis of a Star-wheel Reducer

Forschung im Ingenieurwesen - The star-wheel reducer has been regarded as a promising alternative solution for industrial power transmission where large transmission ratio and high power...     

Bio-inspired power control and channel allocation for cellular networks with D2D communications

With the tremendous increment of traffic in the next generation mobile networks, device to device (D2D) communication is proposed to relieve the traffic burden of the base station and improve the overall network capacity. It supports direct communications between devices and could reuse the resources of cellular users (CUs). Despite the advantages, D2D communications bring great challenges in interference management. In this paper, we study the power control and channel allocation problems in three scenarios: (1) one CU and one D2D pair; (2) one CU and multiple D2D pairs; (3) multiple CUs and multiple D2D pairs. The goal is to coordinate the mutual interferences and maximize the overall network capacity. We derive sufficient conditions to guarantee the efficiency of D2D communications in scenarios with one CU and one D2D pair. We propose the bio-inspired PSO-P power control algorithm for the scenarios with one CU and multiple D2D pairs, and the PSO-CP algorithm for the scenarios with multiple CUs and multiple D2D pairs to jointly assign channels and powers. Simulation results show that the proposed algorithms are efficient in improving the overall network capacity.

     

配加预处理脱硫灰对铁矿烧结基础特性的影响

 半干法脱硫灰堆弃处理占用土地且容易造成二次污染,将脱硫灰预处理后替代CaO熔剂配入烧结有望充分利用其中的熔剂组分,实现脱硫灰在钢铁企业的闭路资源化利用。研究了脱硫灰配加焦粉加热分解特性及替代CaO熔剂配加对铁矿粉烧结基础特性的影响。结果表明,配加1%焦粉可以有效提高脱硫灰分解率,减少CaSO₄的生成。随着预处理脱硫灰替代CaO比例的增加,铁矿粉同化温度和黏结相强度呈现先增加后减小的趋势;液相流动性呈现单调增加趋势,当替代比超过40%时,液相流动性形成了流动性很大的“假象”;黏结相微观结构表明,替代比例小于40%时,有利于烧结试样中铁酸钙的生成;综合考虑,最佳的替代比例应小于40%。     

喷气燃料冰点试验出现悬浮物的探讨

某公司加氢裂化装置生产的喷气燃料在冰点试验时发现了悬浮物，并且悬浮物在回温过程中消失。虽然通过调整原料中催化裂化柴油（简称催化柴油）、外购原料、常三线柴油的掺炼情况，减少原料中芳烃及正构烷烃的含量，但是在冰点试验时依然发现了悬浮物；其次，通过调整反应深度和分馏塔分离效果（喷气燃料馏程），以及对影响喷气燃料质量的其他因素进行排查，仍然未找到出现悬浮物的原因；最后通过化验分析方法排查发现，在干燥环境（没有湿空气的影响）下进行喷气燃料冰点试验时，可以避免产生絮状物，说明空气中的水是喷气燃料冰点试验中产生絮状物的直接原因。因此，在进行喷气燃料冰点试验时要采取措施隔绝水分。     

面向多源数据融合的稀疏表示目标跟踪

传统的基于稀疏表示的目标跟踪方法主要利用目标的灰度特征构建稀疏表示模型。由于灰度特征对光照变化敏感，这会影响目标跟踪在复杂场景下的鲁棒性。基于多源数据融合的目标跟踪可以明显提升目标跟踪鲁棒性，但如何有效融合不同维度，不同类型的多源目标特征成为基于多源数据融合的目标跟踪所要解决的关键问题。提出了一个基于目标状态以及灰度特征的稀疏表示目标跟踪方法。所提出的方法可通过基于核函数表示的稀疏表示模型，在探究目标状态以及灰度特征相关性的基础上，将两种不同维度的特征进行有效融合，提升目标跟踪在复杂场景下的鲁棒性。     

Hydrolysis-resistant polyurethane elastomers synthesized from hydrophobic bio-based polyfarnesene diol

Hydrolytic stability is an essential requirement for polyurethanes (PUs) that are used in highly humid and aqueous environments. In this study, hydrolysis-resistant PU elastomers (PUEs) are synthesized based on hydrophobic bio-based polyfarnesene diol (PFD), which contains unique “bottle brushes” structure (with long branched hydrocarbon side chains). The effect of hard segment (HS) content, ranging from 30 to 50%, on the morphology and properties of PUEs is investigated by Fourier transform infrared spectroscopy, thermogravimetric analysis, differential scanning calorimetry, X-ray diffraction, scanning electron microscopy, tensile, water absorption, and contact angle measurements. The results show that there are prominent phase separations in the synthesized PUEs. The PUEs show a three-stage degradation process and two T_g, one is at about −66 °C and the other 61 °C, which are related to the soft segment and HS, respectively. Water contact angles of PUEs increase from 98.6 to 105.2° with the increasing of PFD structural unit fraction. After being immersed in deionized water for 30 days, PUEs show no significant degradation of both tensile strength and elongation at break, and mass changes of all samples are less than 0.5%. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47673.     

压水堆核电厂压力容器开盖时刻主冷却剂放射性浓度控制要求研究

压水堆核电厂停堆开盖时刻主冷却剂放射性浓度限值是核电厂的重要设计参数。本文基于停堆开盖后厂内辐射风险来源分析,建立了适用于压水堆核电厂停堆压力容器开盖时刻主冷却剂中的放射性浓度控制值评估方法,并采用欧洲第三代压水堆技术方案(EPR)堆型核电厂的设计参数对建立的方法进行了验证。验证结果表明:基于此方法得出的停堆开盖限值与EPR堆型核电厂原设计较接近。